Plastic Batten Splint

2.25” in length. Very rigid, non-rusting metal. This small metal splint fits snugly into the center hole that runs the length of both the off-white and clear plastic battens. A small ridge in the center of the splints centers it perfectly when you join two battens.

To join two battens insert the metal splint in both battens. Tape the seam with a small piece of cellophane tape. If you don’t tape, the junction may come apart. You can join as many battens as you wish. Try to alternate the location of the splint on your shade (on the right, then on the left). Also try to NOT place a splint at the location of a lift line. The advantage of the "Scotchtape" method is that it is quick. On occasion, my battens have come apart, particularly on very wide shades. MM of Stansbury, Utah sent this great tip for a more permanent solution. I dipped each end of the splints in Aleene's Fabric Fusion then connected the battens with the splint. When the ends were pushed together a small amount of the glue seeped out and I wiped it around the seam while holding the ends together for a moment then left it to dry. This morning the batten is as solid as if it had not been two pieces. Another customer told me about using the same technique with Aleene's Jewel-It glue. Either one will work. Just remember to let the glue dry at least 4 hours before attaching the battens to your shade.