|
|
Fabric and Hardware for a Mock-Roman Shade Valance
|
|
As you can see from the drawing of the back of a Mock-Roman Valance, there is very little hardware required for a Mock-Roman Valance. You will need the following items.
- Front Fabric
- Lining
- Mounting Board (normally a 1x2 pine board)
- Muslin or Front Fabric to cover Mounting Board
- Lift Rings, Lift Cord (or string) and screw eyes
- Hook and Loop Fastener (if your shade is very wide and/or heavy)
- Angle irons for an Outside Projected Mount
Let's look at the back of a Mock-Roman Valance to see understand the hardware requirements.
|
|
Valance Width |
Lift Rings |
Lift Cord or String (yards) |
Screw eyes |
Angle Irons (if required) |
|
10" to 14" |
4 |
2 |
2 |
2 |
|
15" to 28" |
6 |
3 |
3 |
3 |
|
29" to 42" |
8 |
4 |
4 |
4 |
|
43" to 56" |
10 |
5 |
5 |
5 |
|
57" to 70" |
12 |
6 |
6 |
6 |
|
71" to 84" |
14 |
7 |
7 |
7 |
|
85" to 98" |
16 |
8 |
8 |
8 |
Now you are ready to hem your valance and sew the side seams using the instructions on the next page.
|
|
|
|
