 Hardware Calculator What's New Links FAQs Getting Started Terrell's Book  Professional Methods Battens Pulleys Bobbin Pulleys Velcro at Top of Shade Large Shade Designing Pieced Roman Shades Living with Roman Shades Variations on Classic Shades Tab-Top Shades Hobbled Shades Relaxed Shades Trapezoid Windows Installation Tips Metal Window or Door Arched Window Corner Windows Multiple Windows Questions about Top-Down Shades Summary of FAQs Terms and Definitions Operating the Hardware Calculator
We are your specialists for making Roman shades, buying Roman shade hardware and learning how to make Roman shades, whether Classic flat shades or top down bottom up shades. |
|
Frequently Asked Questions: Trapezoid Windows Many contemporary homes have large windows that angle along the roof line at the top. These trapezoid windows can be covered with a Roman shade. Look at the two photographs below and you will see how the shade works. The shade is made to fit the window completely when down. The mounting board follows the angled line of the top of the window.
If you are piecing your shade, use a design that follows the lines of the window. In this case, I used a square block set on point since the window had a 45-degree angle.
The mounting board is made as shown in the drawing below.
You can also use this technique to cover an arched window. Home Stores sometimes sell a plastic strip that is notched on one side so that it can be curved. The strip already has the hook Velcro on it. For an arched window, choose a sunburst pattern to piece on the top, which will always be covered. The shade will raise to the bottom of the arch.
Home Shopping Meet The Artist Galleries How To Make Roman Shades |
The shade still
lifts and lowers into horizontal folds. When fully raised, it can only
be pulled up to the lower part of the angle. The entire top portion of
the window will be covered even when the shade is raised. You can use
the 
